Home > Error Verifying > Error Verifying Config Info 7941

Error Verifying Config Info 7941

Contents

Viewing the phone settings from the web interface suggests that it is valid for SIP.96096Leave the rest of these settings alone unless you know what they do (in which case please It worked outbound for about 18 hours, before I had two full resets in short succession. If your phone does not receive this header it will display the wrong date/time, and it will refuse to sync to an NTP server. Unfortunately the "Date: " header on the SIP packets is still munged, and MWI is still broken. http://smartphpstatistics.com/error-verifying/error-verifying-config-info-7821.html

The problem is further complicated by SIP enabled routers, known as SIP Application Layer Gateway (ALG), under normal conditions, the router will 'smartly' alter outgoing SIP register packets by altering the Is it maybe because in Admin Settings -> Security -> Trust List -> there is (signed) next to Configuration ?? I don't know how the phone would cope, it may be OK but it may also fill all flash space and crash the phone. It makes the bold assumption to dial out, you must press 9. https://supportforums.cisco.com/document/8106/ip-phone-displays-error-verifying-config-info-error-message-cisco-callmanager-cluster

Error Verifying Config Info

I am aware of the multiple uses of your SIP username - quite possibly some are redundant.9extension numberSIP proxy5060Put your SIP username in heresip usernameThis next line is for the You have probably used a configuration file from one of the other Wiki's, for a different line of phones. The 7941 and up also come in a G-GE model which has gigabit copper connectivity through the phone, the others have just standard 10/100 for the phone and on the additional Some users have indicated that this process causes the phone to hang with the message "Upgrading".

Most visible is the addition of a "DND" softkey on the front of the phone which is obviously a Do Not Disturb function that turns inbound calls away when activated. So I was able to get hold of the most up-to-date SIP firmware for the 7970 from the Cisco web site, namely version SIP70.8-3-3SR2S . Most visible is the addition of a "DND" softkey on the front of the phone which is obviously a Do Not Disturb function that turns inbound calls away when activated. No Trust List Installed Cisco Ip Phone Version 8.0(3) released 18 May 06, seems to be disaster of a release and has been deferred due to the field notice at http://www.cisco.com/en/US/products/hw/phones/ps379/products_field_notice09186a008072aa8d.shtml In other words, DO NOT USE.

I am aware of the multiple uses of your SIP username - quite possibly some are redundant.9extension numberSIP proxy5060Put your SIP username in heresip usernameThis next line is for the Watch your TFTP server for the files that the phone attempts to retrieve. Your TFTP server needs to have the following at the minimum. (different versions #'s are OK so long as all .xml and .loads files are edited to reflect the version of It just requires your SIP server's DNS name.

This was then followed by 8.0(2)SR1 release which fixed a few critical bugs on the phone.For Cisco customers with a valid Cisco login and support contract - firmware files may be Cisco 7911g Sip Configuration Will figure out what throws the Missed Calls into a tizzy if I have time but for now I'll be going through the patch feature list for functionality. I tried using dazza76's SEP file but kept getting the error in config file. They reported they tried these and they would not work.

Error Verifying Steam Userid Ticket

troy_orndoff 2014-03-03 23:51:08 UTC #105 I dont recall having any issues. The choices on these phones are g711 and g729a (and maybe others?)g729a1013avtfalsefalse3If you are behind a cheap router then these options may be useful. Error Verifying Config Info My dialplan basically just sets a 5 second timer after each digit before the phone starts dialing the digits already entered, but ideally you'd set this so that your most common No Trust List Installed Asterisk If your phone is stuck on registering.

This will allow your phone to receive inbound RTP voice streams. navigate here The cropping of characters seen when running 'show conf' from the command line is fixed. Redial button works. If the web interface does not seem to be working, try setting the value to 0 instead of 1 and reloading the phone. Error Verifying Config Info 7821

All you really have to do ist the sip line configuration in that file. Odd, yes, but for me, setting this to 0 made the web interface visible.1The display settings only apply to the color screen LCD phones. Viewing the phone settings from the web interface suggests that it is valid for SIP.96096Leave the rest of these settings alone unless you know what they do (in which case please Check This Out hihipto 2014-03-05 07:58:12 UTC #109 Hi No1Special00, what parts did you trim from the post#71 template to remove the annoying missed calls from the home screen?thanks No1Special00 2014-03-05 20:46:40 UTC #110

If the phone appears to be downloading but ignoring your config/changes, double check the console logs (see above for how-to steps). Cisco 7941 Sip Can you please show the steps how to check PUBLISHER CCMTFTP SERVERSQL REPLICATIONI have checked in SERVICES all the services is started. A typical SIP registration involves a REGISTER request from the phone (without authentication information), an UNAUTHORIZED response from the SIP server, another REGISTER request (this time with authorization information: Digest username="blah",realm="blah",

Version 8.2(2)SR1 was released March 31 2007 to fix a problem with the Call Lists being in the wrong order.

Type 'show conf' - you should see something like this, which is basically the running config of the phone:Cisco 79x1 SSH example6. Version 8.2(2)SR3 was released May 22 2007 to fix a bug that the phone will fail to register if a duplicate IP is detected. Set 1 to get a stutter, set to 0 if you don't want this feature.1CallStats refer to if the phone feeds back call quality statistics to the SIP server when the Release notes state no resolved caveats however it does appear to resolve at least one problem - that with the DND button displaying an odd error when the DND function is

Close Reply To This Thread Posting in the Tek-Tips forums is a member-only feature. http://mail.parallaxtechnologies.com...ware-download/ However, I cannot connect my phone at all to IC. Version 8.2(2)SR4 was released June 05 2007 Version 8.3(1) was released June 29 2007 and introduces some new features including things like an "Intercom History" in the Directories (not sure what this contact form FINALLY, I go to the CLI command prompt of Asterisk to do "sip set debug" and I see these messages when the phone tries to register : <--- SIP read from

It doesn't matter too much but I believe that this name appears on the remote phone if it supports it. If the web service is not enabled you can try logging in with SSH. diciccog 2014-05-22 19:45:07 UTC #118 Simcity - Thanks for a fantastic tutorial, this has helped me out a lot!I sent you a PM, could you please send me a copy of Unfortunately the "Date: " header on the SIP packets is still munged, and MWI is still broken.

It's running SIP. This will allow your phone to receive inbound RTP voice streams. The console port operates at 9600 baud, 8 data bits, no parity information, and 1 stop bit.